Instruction Guide for AV2SH |
|||||||||
 |
 |
||||||||
|
Remove endcaps & slide extrusion into center of
the channel and back of base.Tighten with allen key and replace endcaps.
|
Slide AV Shelves through top into desired position.
|
||||||||
 |
|||||||||
 |
|||||||||
| When shelves are in desired position, tighten each screw with an Allen wrench. |
If using standard mount(s), place in desired location
and tighten each screw.
|
||||||||
 |
|||||||||
 |
|||||||||
|
If using a tilting mount, twist rod until mount is
in desired position and place mount down into pole.
|
Tilt mount to desired angle and tighten screws to
secure.
|
||||||||
 |
 |
||||||||
|
Tighten top screw to secure rod in place.
|
After attaching bracket to television(s) with provided
screws, line up holes with mount(s) and slide into place.
|
||||||||
 |
|||||||||
| Finished Display. | |||||||||
|
|
|||||||||
